The Talisman Sieves for Wet or Dry Materials
Assembly instructions

Special Features

A range of three sieves for different purposes made from lightweight resilient plastic. A rotary mouli type sieve for sieving large batches of glaze or slip, and a smaller hand type sieve for smaller batches. These both use the same interchangeable push in and out screens in a variety of mesh sizes. Also available is a very small test/mini sieve with fixed mesh in a variety of mesh sizes for test batches of glaze or for sieving stains.


Rotary Sieve

The Rotary Sieve (pic 1) has a tapered, plastic body which fits firmly on any round container. Handle extension allows it to rest on extra large containers (pic 2).

Push-in screens with moulded rubber rims are interchangeable. Stainless steel screens available in the following meshes: 10#, 20#, 30#, 40#, 50#, 60#, 80#, 100#, 120#, 150# and 200# (pic 3).

Either wet or dry materials can be sieved quickly. For example, dry ash can be put through a screen as fine as 100 mesh.

The brush-cluster is rotated against the screen by turning the handle and the pressure required is regulated simply by pressing on the handle as it is turned.

Brushes are held in a moulded plastic centre-piece sufficiently tightly to ensure that they maintain contact with the screen even if this distorts with use.

Brushes have nylon bristles set in a plastic back; they won't absorb colour and are easily washed. They are long-lasting, yet easily replaced.

After use, the screen can be removed and the brush-cluster pushed through the bottom of the sieve for easy washing.

The handle is easily removed for easier transport, or if several brush-heads are needed for different purposes - eg, for wet or dry uses.

The handle runs in a graphite-impregnated nylon bearing well clear of the abrasive materials being used.

When dismantled, the sieve can be sent by parcel post. It comes with clear instructions for assembling.

Specifications

Materials

Bowl - white polyethylene plastic
Brushes - red plastic with nylon bristles
Crank handle - black powder coated steel with wooden knob
Frame - aluminium
Screens - rubber lip with stainless steel mesh

Size

Diameter across top - 41 cm (16 1/4")
Diameter across bottom - 22 cm (8 1/2")
Depth - 15 cm (6")

Hand Sieve

Made of the same plastic material as the bowl of the rotary sieve. Uses the same size screens and is handy for smaller batches or test glazes. Tapered body will fit normal size bucket. Comes complete with spatula.

Specifications

Size

Diameter across top - 27 cm (10 1/2")
Diameter across bottom - 22 cm (8 3/4")
Depth - 7.5 cm (3")

Test/Mini Sieve

One piece construction made from PVC. Ideal for sieving stains and test batches of glaze. Available individually in mesh sizes as above.

Specifications

Size

Diameter across top - 11 cm (4 1/4")
Diameter across bottom - 8 cm (3 1/4")
Depth - 4.5 cm (1 3/4")

| Back | Assembly Instructions | Find out where to buy these products |